Realized for profiles up to 20m long.
This type of system is entirely integrated to the extrusion line and is fully automated.
Realized for profiles up to 30m long.
The shear is fastened to the upper part of the casings. The shear consists of a structure inside of which is sliding a blade-holding carrier, driven by a hydraulic cylinder.
Realized for presses up to 18”.
The furnace main body is made of strong steel profiles that hold special panels.
The insulating device consists of prefabricated panels with embedded compressed rock wool in order to get an efficient protection.
Realized with a productivity up to 12000kg/h and for billets up to 12”.
Conical heating up to 250°C/m.
The stacker is made of two overhanging moveable rollways, one for the intake and one for the releasing of the layers.
Chains allow the vertical motion and the system has guiding wheels on the sides.
Realized for profiles up to 600mm height.
Realized for presses from 5” up to 12”.
The idea behind this concept is avoiding the use of baskets or skips in the extrusion shop.
The transversal flow ageing oven type is adopted when the temperature tolerance is very strict.
Obtained performances from 100-200T/h up to 900T/h of recirculated material.
Magnetohydrodynamic (MHD-stirrer) is a device designed for molten aluminium mixing, thanks to the flux created by a magnetic field.
Realized for presses up to 40” and up to a tearing force of 5000kg.
Realized for billets up to 18”
A log saw gives the advantage of a flat-to-flat coupling surface when a billet is to meet the next in the press container.
Balanced, flexible & controllable
Cometal Engineering realized BICS for automotive, railways and aerospace applications, for presses from 10MN up to 120MN, with only air, only water, air + water spray, air + water wave.
Realized for profiles up to 700wx400h mm.
Fully automatic cycle processed with a total security.
Rapid heating furnaces for logs from 4" to 20" with a productivity up to 30000kg/h with idle or driven rolls.